Enquiry
Solutions

Technical solutions for your application.

VERAUT develops devices and systems for automatic data acquisition, data transmission and monitoring of technical facilities.

Our solutions are used, among other things, in gas and water supply, in the energy sector and in building services. The following examples show typical applications and the VERAUT products suited to them.

Gas supply

Recording and transmitting readings from gas pressure regulating and metering stations automatically.

The situation

  • Explosion protection requirements apply in certain areas of gas facilities. In addition, remote metering points do not always have an external power supply.
  • Hourly consumption and load profile values are needed for operational evaluations and certain applications. This can include gas consumed by the operator’s own facilities.
  • Volume converters from different manufacturers and device generations with different interfaces and protocols.
  • Manual on-site reading causes additional time and staff effort.

How we solve it

Battery-powered VERAUT data loggers record readings from gas meters, volume converters and connected sensors. The readings are stored and transmitted over mobile radio to VERILOG or an existing data acquisition or control system.

Device versions with the corresponding approval are available for use in hazardous areas.

For remote reading of individual gas meters, compact data loggers or radio modules can be used depending on the meter type.

Matching products

  • VERIBOX-MINIData acquisition and mobile transmission in hazardous areas for which it is approved
  • NB IoT Box MINIConnecting several measuring devices and transmitting via NB-IoT
  • NB IoT Box LITE PRESSUREMonitoring gas network pressure and pressure curves
  • LORABOXRadio transmission of meter data via LoRaWAN and Wireless M-Bus
  • VERILOGCentral display and evaluation of the transmitted readings

Reference: VERAUT data loggers in use at Wiener Netze →

Water supply

Monitoring water consumption, reservoir levels and network pressure centrally.

The situation

  • With infrequent meter readings, unusual consumption patterns and possible water losses can go unnoticed for a long time.
  • Water reservoirs and other supply facilities are sometimes located at remote sites without a suitable external power supply.
  • Without regular data acquisition, pressure fluctuations and noticeable volume deviations in the supply network can only be traced to a limited extent.
  • Regular inspection and reading trips tie up staff and cause additional effort.

How we solve it

Ultrasonic water meters with integrated radio communication allow consumption data to be recorded and transmitted automatically. Regular evaluation makes it possible to detect unusual consumption patterns and possible continuous consumption early.

MOBILE SILO records and monitors the levels of reservoirs. With the NB IoT Box LITE PRESSURE, pressure values can be recorded and transmitted at suitable measuring points in the water supply network.

VERILOG displays the readings centrally and allows inflow and consumption volumes to be compared. Noticeable balance differences can indicate possible water losses.

Matching products

  • VUS metersUltrasonic consumption measurement with integrated radio communication
  • NB IoT Box MICRONB-IoT communication module for integration in suitable measuring devices
  • MOBILE SILOLevel monitoring of reservoirs and storage tanks
  • NB IoT Box LITE PRESSUREAutomatic recording and transmission of network pressure values
  • VERILOGDisplay of readings, limit monitoring and water balancing

Application example: consumption metering in the municipality of Fresach →

Heat and energy supply

Recording and transmitting heat and consumption data automatically.

The situation

  • Heat transfer stations are located at different sites within the supply network.
  • Regularly recorded measurement and consumption data are needed for operational evaluations, load forecasts and the assessment of network losses.
  • Meters and measuring devices from different manufacturers have different communication interfaces and protocols.

How we solve it

Suitable measuring devices with integrated radio communication and data loggers for connecting existing meters are available for the automatic recording of heat and consumption data.

Depending on the device version, data can be acquired via M-Bus, Modbus RTU over RS485 or pulse outputs. The stored values are transmitted at configurable intervals to VERILOG or a compatible data acquisition or control system.

Matching products

  • VUS meters (VUSHM)Ultrasonic measurement technology for heat supply applications
  • NB IoT Box MINIConnecting compatible measuring devices via various inputs and interfaces
  • VERILOGCentral display and evaluation of measurement and consumption data
Buildings and housing

Recording consumption data automatically, without regular on-site reading appointments.

The situation

  • Providing sub-annual consumption information in line with the applicable requirements.
  • Meters are often located in basements, utility shafts or hard-to-reach installation areas.
  • Manual readings require additional organisation and may require access to rented flats or technical rooms.

How we solve it

With the NB IoT Box LITE, existing water and heat meters can be retrofitted for automatic remote reading via compatible pulse or encoder interfaces.

The recorded meter data is transmitted via NB-IoT to VERILOG or an existing data acquisition system, where it can be evaluated and provided for further processing in billing and management systems.

Whether reliable mobile transmission from basements or utility shafts is possible depends on network coverage at the installation site.

Matching products

  • NB IoT Box LITEAutomatic remote reading of existing compatible meters
  • VERIBOX-MINIRemote reading of several meters and measuring devices via mobile radio
  • VUS metersUltrasonic consumption measurement with integrated communication, depending on version
  • VERILOGCentral display, evaluation and transfer of consumption data

Reference: 37 public buildings with automatic consumption metering (ViWa GmbH) →

Custom developments

Do you need an individual technical solution?

Not every measurement, communication or automation task can be solved with a standard product.

VERAUT develops hardware, firmware and software in-house and supports companies in implementing customer-specific electronics and communication solutions.

Describe your technical task to us. Together we will check whether an existing product can be adapted or whether an individual development makes sense.

Let’s talk about your metering point.

Briefly describe your application, meter type, installation site and hazardous area zone. We reply within up to three working days.

VERAUT GmbH · Derfflingerstraße 14/C/3 · 4020 Linz, Austria
+43 732 386361-0 · info (at) veraut.com

What is it about?
0